C35 Concrete is considered the best concrete for heavy equipment. Other types of concrete include
- C10 Concrete
- C20 Concrete
- C25 Concrete
- C30 Concrete
- C35 Concrete
The number corresponds to the strength of the concrete. For example, C10 concrete meant that it’d have the strength of 10 newtons after 28 days. Therefore C35 concrete which is the most commonly used concrete for heavy equipment, has a strength of 35 newtons. It is a heavy-duty concrete that is widely used for commercial and industrial purposes. Some of the applications of C35 include
- Bridges
- Tunnels
- Slabs
- Piling
- Paving
- Flooring
- Building Foundation
- Strengthening building bases
- Large scale projects
Composition of C35 Concrete
It consists of ordinary Portland cement mixed with aggregates such as sand, stone, or gravel. Then water is used to mix them. Sometimes other mixtures are also added to improve the result of concrete. The exact quantity of the material can vary depending on the manufacturer.
Prerequisites of Concrete Selection
Why is C35 considered the most suitable concrete for heavy equipment? To answer these questions let’s take a long look at some of the prerequisites of selecting cement.
1) Assess Heavy Concrete Equipment Requirements
What are the requirements of your Concrete Equipment? Different types of machinery are used in a construction project, having different load capacities. So it is important to understand the load capacity before choosing any type of concrete.
Other than that, some equipment is moving while others are stationary. The concrete needs to accommodate every type of equipment. C35 slabs are effective for both of these types of loads.
2) Long-Term Considerations of Concrete for Heavy Equipment
In addition to short-term considerations, there are also some long-term considerations for choosing concrete for heavy equipment.
- Environmental Friendly: Nowadays following sustainable practices has become essential. The construction industry has considerably contributed to air and noise pollution. It is vital to follow environmentally friendly protocols where it can be followed.
- Longevity: The concrete you choose needs to be durable. It should have a long life span so one does not have to spend a lot of money on maintenance. The longevity of concrete comes from its strength and resistance.
- Less Maintenance: Over time, some types of concrete can wear and tear. For example, C10 concrete has a strength of only 10 newtons. If you use this concrete for heavy equipment, it would crack and break as it cannot carry heavy loads. This will increase maintenance costs.
Why C35 or PAV2 Concrete?
C35 concrete is also known as PAV2 concrete. Here are some of the properties and characteristics of this concrete type.
1) Thickness
If you are looking for the perfect concrete for equipment, you need to take into account the thickness. Most heavy machinery requires at least 6 inches of thickness. Some professionals even state that it should be 12 inches thick for safety purposes.
C35 is carefully created to meet the requirements of such conditions. It ensures optimal performance and durability.
2) Strength and Durability
Strength is another important factor to consider by searching for concrete for heavy equipment. As discussed before, C35 has the strength of 35 newtons after the curing process.
It can support heavy machinery and maintain structural integrity. It is less likely to crack under the weight of load-bearing machinery. In addition to strength, it is a durable material and can last for a long time.
3) Resistive Properties
C35 concrete type is resistant to cold weather which makes it ideal for colder locations. Air bubbles can protect it from cold weather. So it is resistant to weather wear and tear.
Other than that it also offers protection against fire. Fire resistance is an important property to have in certain areas. The greater thickness of C35 offers better fire resistance.
4) Cost
Cost Estimation of concrete is a crucial part of concrete procurement. It helps to plan an accurate budget and prevents cost overruns.
The cost of C35 concrete is around $140 to $250 per cubic meter. For an accurate analysis of cost, it is better to opt for cost-estimating services. They will perform a precise takeoff and create an effective budget for your construction plans.
Concrete Estimating Services
Concrete Estimating Services play an important role in construction. Every contractor and builder knows the importance of managing money while constructing a building. If you are worried about the cost of concrete, you can rely on cost estimators to decide a perfect budget for you.
SMA Estimating LLC is experienced in creating customized budgets according to the requirements of the project. They have the fastest turnaround rate and provide their clients with accurate results in a short time.
Final Thoughts
All of the pointers mentioned in this article tell us that C35 is the most suitable concrete for heavy equipment. If you want to use it in your construction project, make sure to get an accurately estimated budget first. It will help your project to stay on track and be completed within the set budget. SMA Estimating LLC is a popular choice among contractors and project managers due to the reliability of their estimates. So don’t worry about the cost and leave it to professionals!